Product Description
Specifications
| ANSI Lumens (3600mAh 18650 Li-ion Battery) | High mode: 1600, Low mode: 300, Strobe mode: 1600 |
|---|---|
| Runtime (3600mAh 18650 Li-ion Battery) | High mode: 80 min, Low mode: 5.7 h, Strobe mode: 2.6 h |
| Beam Intensity (cd) (3600mAh 18650 Li-ion Battery) | High mode: 31600, Low mode: 6806 |
| Beam Distance (m) (3600mAh 18650 Li-ion Battery) | High mode: 380, Low mode: 165 |
| ANSI Lumens (2 x CR123A Battery) | High mode: 1100, Low mode: 300, Strobe mode: 1100 |
| Runtime (2 x CR123A Battery) | High mode: 50 min, Low mode: 2.7 h, Strobe mode: 1.6 h |
| Beam Intensity (cd) (2 x CR123A Battery) | High mode: 24806, Low mode: 6806 |
| Beam Distance (m) (2 x CR123A Battery) | High mode: 315, Low mode: 165 |
| Impact Resistance | 1m |
| Waterproof | IPX6 |
Reviews
-
The best grip light I own
This is a very comfortable grip, it fits large hands quite well, and the mechanism retaining the swappable grip shapes is very stout yet very simple (slide desired grip shape under grip surface, squeeze the grip shape against the grip assembly, install bolt through rear of grip shape into grip assembly). The laser/light controls are ambidextrous and thoughtfully laid out to compliment the ergonomics of the grip itself (one thumb button on either side, both buttons tied to the same functions). The light is very bright and adjustable, featuring dimming (hold either switch with the light already on until desired brightness is achieved), momentary on (press and hold switch until light is no longer needed, then simply release the switch to turn off), switch on (single brief click for on, and again for off) and strobe (double click power switch). There are 3 modes controlled by a rotating ring near the lens, easily twisted with the thumb and pointer finger (rotate ring to switch between just laser, laser and light, or just light). The laser is easily adjusted with the included tool and the flashlight assembly is keyed to the grip, so the laser always returns to zero when the flashlight assembly is locked back into the grip using the cam-tab. The laser/light is charged with a typical USB C cable via the port beneath a rubber cover, so it won't be necessary to carry a proprietary cable, however the light must be removed from the grip to access the USB C port.
